ANALISA BAHAYA DENGAN METODE JOB SAFETY ANALYSIS (JSA) PADA PEKERJAAN STRINGING SUBKONTRAKTOR PLN PROYEK REKONDUKTORING SUTT 150 KV TANJUNG-JATI
Keywords:
Hazards, Risks, Stringing, Safety, ElectricityAbstract
PLN workers are in an unsafe condition where they use energized equipment or conductors. In electrical construction projects at PLN, the use of Job Safety Analysis (JSA) facilitates the identification of hazards and risk assessment. The purpose of the study presented in this research is to investigate the practices and benefits of JSA in a case study of electrical construction projects where the level of hazards and risks is greater than other construction projects. In electrical construction projects at PLN, the use of JSA facilitates the identification of hazards and risk assessment. The objective of the study presented in this research is to investigate the practices and benefits of JSA in a case study of electrical construction projects where the level of hazards and risks is greater than other construction projects. The research model employs a qualitative approach to investigate the practices and benefits of JSA in the construction industry during electrical work processes. The qualitative study consists of interviews with workers, direct observation of the work processes at PLN's 150 kV Tanjung-Jati re-conductoring SUTT project, and analysis of work documents. JSA in PLN construction work is useful for facilitating the identification of hazards and risks. Safety briefings can be conducted to remind workers about the hazards and risks they face and provide instructions according to work procedures and proper use of personal protective equipment (PPE).
Downloads
References
Albert, A., Hallowell, M.R., Kleiner, B., Chen, A., Golparvar-Fard, M., 2014. Enhancing construction hazard recognition with high-fidelity augmented virtuality. J. Constr. Eng. Manage. 140 (7).
Albert, A., Hallowell, M.R., Skaggs, M., Kleiner, B., 2017. Empirical measurement and improvement of hazard recognition skill. Saf. Sci. 93 (1), 1–8.
Carter, G., Smith, S.D., 2006. Safety hazard identification on construction projects. J. Constr. Eng. Manage. 132 (2), 197–205.
Castillo-rosa, J., Suarez-cebador, M., Rubio-romero, J.C., Aguado, J.A., 2017. Personal factors and consequences of electrical occupational accidents in the primary, secondary and tertiary sectors. Saf. Sci. 91, 286–297. https://doi.org/10.1016/j. ssci.2016.08.021. Constr. Eng. Manage. 132 (2), 197–205.
Cotton, J.L., Vollrath, D.A., Froggatt, K.L., Lengnick-Hall, M.L., Jennings,K.R.,1988.Employee participation: diverse forms and different outcomes. Acad. Manag. Rev. 13 (1), 8–22.
Eurostat, 2016. Accident at work statistics. < http://ec.europa.eu/eurostat/statisticsexplained/index.php/Accidents_at_work
_statistics >
Fangen, K., 2004. Deltagende observasjon. In Norwegian [Particpatory observation].Fagbokforlaget, Bergen.
Ferguson, R., Wilkinson, W., Hill, R., 2000. Electricity use and economic development 28.
Frijters, A.C.P., Swuste, P.H.J.J., 2008. Safety assessment in design and preparation phase. Saf. Sci. 46, 272–281.
Kjellen, U., Albrechtsen, E., 2017. Prevention of Accidents and Unwanted Occurrences: Theory, Methods, and Tools in Safety Management. CRC Press, Boca Raton, FL.
Lee, C.R., Dougherty, W., 2003. Electrical injury: mechanisms, manifestations and therapy. IEEE Transactions on Dielectrics and Electrical Insulation 10, 810–819. Roughton, J.E., Crutchfield, N., 2008. Job Hazard Analysis: A Guide for Voluntary
Compliance and Beyond. Butterworth-Heinemann, Burlington.
Sucofindo. 2019. Buku Pedoman Supervisi Poyek Jaringan. Jakarta : Sucofindo
Swartz, G., 2002. Job Hazard Analysis - a primer on identifying and controlling hazards.
Profess. Safety 27–33
Yoon, I.K., Seo, J.M., Jang, N., Oh, S.K., Shin, D., Yoon, E.S., 2011. A practical framework for mandatory job safety analysis embedded in the permit-to-work system and application to gas industry. J. Chem. Eng. Jpn. 44 (12), 976–998.
Zheng, W., Shuai, J., Shan, K., 2017. The energy source based job safety analysis and application in the project. Saf. Sci. 93, 9–15
